This time, it is a repair of “Pinholes” formed on the bottom plate slab surface.
Is there anything that stands out even though you filled it with polymer cement or repair material?
This is a request to somehow make such repair marks inconspicuous.
Of course, it’s easy if you carefully match the colors one by one, but it’s difficult if there is no construction period or the range is wide.
Repair marks are quite noticeable
The white part is the repair mark.
It’s hard to erase them one by one.
Therefore, I lightly spray “C Repair Color” on the entire surface to blur the color difference.
The tips is to blow one layer evenly over the entire area, and add two to three times to the darker areas.
↓Photos during construction. About the left half has been sprayed.
If it is about 100㎡, the work will be completed in about 30 minutes.
Finished
It feels like I saw it at a glance, but my impression has changed quite a bit.
It is enough if construction is completed in less than 2 hours, including curing and preparation. It’s super easy, so I recommend it!
If you have any questions, please contact us.
Leave a Reply