Month: February 2023

Cross section repair and Surface finishing

This time, we have repaired the steps that were created during the concrete casting process. The depth is about 10 to 30 mm at the part where crosspieces…

How to easily make repair marks (Pinholes) less noticeable

This time, it is a repair of “Pinholes” formed on the bottom plate slab surface. Is there anything that stands out even though you filled it with polymer…

How to fix Cracks / Exposed concrete repair

Cracks also vary from minor cracks to severe cracks. This timeI’ve repaired Minor cracks, so I’ll explain it with a picture. In addition, this crack repair is a…

Concrete dirt floor troubles~Full painting~

One of the most frequently asked questions from our customers is “finishing and repairing concrete dirt floors”. for example,,, ・During the pouring of concrete, it was hit by…

Eliminates water puddles in the Concrete Dirt Floor / Partial raising with resin mortar + color matching

This time it’s a concrete dirt floor repair. Improved drainage around rounded areas. → Raise the lower part. A common pattern is that a cement-based repair material is…

Cracks caused by drying shrinkage of concrete

This time, “cracks due to drying shrinkage” on the slab surfacewill repair. This phenomenon occurs due to the rapid loss of surface moisture during concrete placement.(* This is…

Clean the rust and dirt on the concrete surface during construction.

It is unavoidable in the process, but the dirt that has adhered during construction. This time, we will clean the rust stains on the new concrete surface before…