Month: March 2023Page 1 of 2
Method 1, Before treatment Before the treatment, the surface has a honeycomb damage with a depth of 0 to 20 mm or less. 2, Applying the base Moisten…
Method 1, Before treatment How the surface looks before treatment. 2, Grinding the uneven surface Use a diamond cup wheel or a Level Grinding Wheel to make the…
Method 1, Before treatment How the surface looks before getting treated. 2, Applying primer Remove dust and dregs, and apply resin primer. *In the photo, Alpron W-301 is…
Method 1, Before treatment How the surface looks before getting treated. 2, Applying primer Remove dust and dregs, and apply cement primer. 3, Filling with repair material Knead…
Method 1, Before treatment How the surface looks before getting treated. 2, V cut with a grinder Cut in a V shape along the crack. 3, Resin-based repair…
(For broom-finished concrete) Method 1, Before treatment The surface before treatment. 2, Condition of the repair material Knead Repair Resin with less amount of water to make it…
Method 1, Before pin holes treatment Apply the cement primer or water to the repaired area, and softly knead Repair Resin. 2, Filling the repair material Apply Repair…
Method 1, Before pin holes treatment Knead Repair Resin to a slightly stiff consistency. 2, Filling the repair material Fill in the pin holes with Repair Resin, let…
Method 1, Before rust treatment How it looks before treating. 2, Color adjustment Use C Repair Color that matches the surface and check it on an inconspicuous area….
This time, we repaired the non-shrink mortar placement mark on exposed concrete. ↓Because the position of the bolt was wrong, the part where non-shrinking mortar was placed after…